Descendants of the Dragon convene
Spread Their Wings and Soar
Home / Products / Band Saw Machine / Rotate band saw machine /

KT6140-X Rotating semi-auto band saw machine

KT6140-X Rotating semi-auto band saw machine

KT6140-X Rotating semi-auto band saw machine
CategoriesRotate band saw machine
Cutting capacity(mm)0° Height:400 Width: 610 45。Heiqht400 Width: 400
Blade process speed (m/min)18-80 transmission
Blade specification (mm)1.1*34*5640mm
Power of main motor(KW)Y2/5.5-4
Power of oil-pump motor (KW)0.75
Power of cooling pump motor(KW)0.12
Table height(mm)790
Machine size(mm)2880*1910*1940
Terms of PaymentL/C, T/T, Paypal
Update Time2021-10-19
Detail Information

Double valve control has the advantageof Unique flow control mode

Reset valve can exactly have an adjust according to the material difference
Wire Brush
It's better to prolong the saw blade usage life with the active wire brush and clear water gun
Dedicated design of band saw machine frame 
Reduce the saw cutting load rate of all types of materials, such as pipe and other shaped materials, and increase cut efficiency

Precise angle positioning 

The saw blade process speed is five step.

It mainly refers to Stainless steel, tool steel, bearing steel, carbon steel, aluminum and so on. The material can be good efficiency

Transmission system

Adopt High-torque low-noise turbine gear. Equipped with high power motor of Europe standard. With the advantages of stable cutting and high efficiency.

Hydraulic cooling system

To lower hydraulic system to raise 30% temperature, and to improve the stability of hydraulic system.

Auto chip removal system

Hollow screw chip conveyor avoid to be sticking, and can clean chips effectively to lower labor cost.
Saw blade hydraulic tension
The saw blade tension is set and kept by hydraulic way, and the saw blade will loosen to improve the machine Cutting efficiency and prolong the lifetime of saw blade when machine stop 



Cutting capacity(mm)

0° Height:400 Width: 610

45°Height 400 Width: 400

Blade process speed (m/min)


Blade specification (mm)


Power of main motor(KW)


Power of oil-pump motor (KW)


Power of cooling pump motor(KW)


Table height(mm)


Machine size(mm)


Angle positioning mode
Digital automatic positioning

Vice clamping way


Work tensioning form


Feed adjustment method

Double valve control

Hydraulic cooling way

Wind cooling

Chip conveyor way
Screw style auto convey
Contact us for free modeling
Just fill-in the form below and we will response to you within 12 hours.