Descendants of the Dragon convene
Spread Their Wings and Soar
Home / Products / Band Saw Machine / Vertical band saw machine /

KT10090-350S vertical metal cutting band saw machine specification

KT10090-350S vertical metal cutting band saw machine specification

KT10090-350S vertical metal cutting band saw machine specification
CategoriesVertical band saw machine
BrandLoginFly
ModelKT10090-350S
Cutting capacity(mm)Height:900 Throat depth:1000 Stroke:3500
Blade process speed (m/min)18-80
Blade specification (mm)1.6*54*7200mm
Power of main motor(KW)Y2/11-4
Power of oil-pump motor (KW)2.2
The motor of material feeding (KW)2.2
Power of cooling pump motor(KW)0.12
Table height(mm)1500
Machine size(mm)5200*1800*3100(L*W*H)
The dimension of work table(mm)4000*2000*1500(L*W*H)
FOB portSHANGHAI, NINGBO
Terms of PaymentL/C, T/T, Paypal
Update Time2021-10-19
Detail Information
The device of choosing cutting position
Adopt red ray choosing cutting position to show the saw blade cutting position accurately
Saw blade tensioning
Hydraulic saw blade tensioning can adjust the tensioning pressure of saw blade
The device to feed
Adopt high precision rolling ball screw to improve the cutting stability
Wire brush
It's better to prolong the saw blade usage life with the active wire brush and dear watergun
Transmission system
Adopt High-torque, low-noise turbine gear. Equipped with high power motor of Europe standard. With the advantages of stable cutting and high efficiency.
Hydraulic cooling system
To lower hydraulic system to raise 30% temperature, and to improve the stability of hydraulic system
The system of material feed
Lift type or feed roller device, can perfectly help heavy duty material feed
The device of staircase
Its convenient for entering the system
control area and lifting material 

Item/Model

KT10090-350S

Cutting capacity(mm)

Height:900 

Throat depth:1000 

Stroke:3500

Blade process speed (m/min)

18-80

Blade specification (mm)

1.6*54*7200mm

Power of main motor(KW)

Y2/11-4

Power of oil-pump motor (KW)

2.2

The motor of material feeding (KW)

2.2

Power of cooling pump motor(KW)

0.12

Table height(mm)

1500

Machine size(mm)

5200*1800*3100L*W*H

The dimension of work table(mm)

4000*2000*1500L*W*H

The way of choosing cutting position

Red ray choosing cutting position

Vice clamping way

Manual

Work tensioning form

Hydraulic

Work in adjusting way

Servo stepless speed regulation

Hydraulic cooling way

Wind cooling

Contact us for free modeling
Just fill-in the form below and we will response to you within 12 hours.
*Email
Tel
*Title
*Content