Descendants of the Dragon convene
Spread Their Wings and Soar
Home / News
News Group
News
  • horizontal automatic band saw cnc metal cutting  machine
    horizontal automatic band saw cnc metal cutting machine
    The ability that the operator must master when operating the metal band sawing machine
    2021-06-28
  • The characteristics of pipe cutting machine
    The characteristics of pipe cutting machine
    The characteristics of the machine
    2021-06-28
  • What are the noises when using a metal band saw
    What are the noises when using a metal band saw
    The so-called noise of the metal band saw is actually the noise generated by the machine itself. In layman's terms, it is the vibration, impact, friction, and noise generated by the band saw blade, the sawing machine and the workpiece being sawed.
    2021-06-23
  • The ability that the operator must master when operating the metal band sawing machine
    The ability that the operator must master when operating the metal band sawing machine
    The ability that the operator must master when operating the metal band sawing machine
    2021-06-23
  • How to Use a Band Saw
    How to Use a Band Saw
    Band saws are versatile. While they don’t cut straight as well as a table saw does, they’re safer to use. And while a table saw can cut joints such as dadoes and rabbets that a band saw can’t, these joints are also easily cut with a router
    2021-06-22
  • Discussion on the maximum sawing capacity and the best sawing capacity of the band sawing machine
    Discussion on the maximum sawing capacity and the best sawing capacity of the band sawing machine
    When purchasing a new sawing machine for material cutting, users of band saw blades should understand in detail the various performances of the band saw machine and the difference between the maximum cutting width and the optimal cutting width. "Okay. The instruction manual of this sawing machine shows that the device has the ability to cut 250mm large materials. Let's drag 250mm solid stainless steel here to see if it can be sawed?"
    2021-04-30
  • Cutting fluid selection
    Cutting fluid selection
    We must first understand the characteristics of oil-based and water-based cutting fluids. Generally speaking, oil-based cutting fluids have good lubricating properties, while water-based cutting fluids have good cooling properties, and emulsions have certain lubricity and rust resistance, as well as certain cooling and cleaning properties, but are prone to microorganisms And decomposition and deterioration occurred.

    2021-04-23
  • Severe wear of tooth tips
    Severe wear of tooth tips
    Incorrect running-in procedure is adopted. When the new bimetal band saw blade starts to use, it cuts about

    500 cm² of material with 70% of normal linear speed and 50% of normal feed speed, when the carbide band

    saw blade is running in The line speed should be set lower.
    2021-04-16